Dutton-Lainson Company

LOADBREAK FEED-THRU INSERT ELASTIMOLD Loadbreak feed-thru insert provides an external loop through feature for single well transformers or radial transformers. Bushing alignment feature provides exact insert positioning without backing out of the bushing well. Ensures maximum current carrying ability and superior dielectric joint. Amflex(TM) contacts: commutating piston contact provides the ability to move while maintaining electrical contact. Elastimold thermoplastic switching material has highest temperature withstand and solvent resistance of proposed "standard" arc quenching materials. Welded connections: welded bus bar offers a more reliable current carrying connection. Thick molded rubber shield. Teflon-coated. Nom. Kv: 15, Ctn. Qty.: 1, Wt., Lbs.: 5

LOADBREAK JUNCTIONS ELASTIMOLD(R) Junctions are designed for vault or apparatus applications and can be used for sectionalizing, looping, tapping, or for apparatus changeout. Loadbreak junctions, when mated with appropriate Elastimold products provide a fully-shielded, fully-submersible, separable, insulated assembly designed for energized operation. Suitable for use on 15-kv class, 4-wire multigrounded systems or 3-wire, ungrounded systems. Rated for 200-ampere loadmake/break operations 8.3 kv phase-to-ground and 14.4 kv phase-to-phase. Designed to mate with the following Elastimold products: 165LR and 166LR elbow connectors, 160DR deadend receptacle, 370TR test rod, 160GLR grounding elbow. Junctions do not include mounting brackets. Description: 3-Point, Ctn. Qty.: 1, Wt., Lbs.: 4

LOADBREAK JUNCTIONS ELASTIMOLD(R) Junctions are designed for vault or apparatus applications and can be used for sectionalizing, looping, tapping, or for apparatus changeout. Loadbreak junctions, when mated with appropriate Elastimold products provide a fully-shielded, fully-submersible, separable, insulated assembly designed for energized operation. Suitable for use on 15-kv class, 4-wire multigrounded systems or 3-wire, ungrounded systems. Rated for 200-ampere loadmake/break operations 8.3 kv phase-to-ground and 14.4 kv phase-to-phase. Designed to mate with the following Elastimold products: 165LR and 166LR elbow connectors, 160DR deadend receptacle, 370TR test rod, 160GLR grounding elbow. Junctions do not include mounting brackets. Description: 4-Point, Ctn. Qty.: 1, Wt., Lbs.: 6

TERMINATION KITS ELASTIMOLD Underground, single piece, slip lit terminators for use with 15KV URD cable. SKV Complete with stem connector. Size: 1/0 STR, Ctn. Qty.: 1

Elastimold cable terminations are available in single-piece or modular designs. Terminators allow connection and transition from shielded, underground cable to bare overhead conductors and live-front equipment. Units are designed and rated per IEEE standard 48 for riser pole, pad mount, indoor and outdoor applications.

STAND-OFF PLUG ELASTIMOLD Stand-off plug, when used with proper Elastimold mating products, is fully­shielded, fully-submersible, separable insulated connector designed for energized operation. Suitable for use with 15-kv class loadbreak connectors on systems specified in the electrical ratings for this product. Used to isolate and "dead-end" an Elastimold elbow connector. Designed to mate with the following Elastimold products: 165LR elbow connector, 166 LR elbow connector, 160DR dead-end receptacle. Stand-off plug kit contains the following: stand-off plug complete with mounting hardware, 1 tube silicone grease, 1 wiping cloth, and installation instructions. Kv: 15, Ctn. Qty.: 1, Wt., Lbs.: 1

LOADBREAK FEED-THRU CONNECTOR KIT ELASTIMOLD When used with the proper Elastimold mating products, the 163FTR is a fully-shielded, full-submersible, separate insulated connector designed for energized operation. Suitable for use with 15-kV class loadbreak connectors on systems specified in the electrical ratings for this item. Designed to mate with the following Elastimold products: 165LR and 166LR elbow connectors, 160DR/160DRG insulated cap, 370TR test rod, 160GLR grounding elbow. Nom. Kv: 15, Pkg. Qty.: 10

DEAD-END RECEPTACLE ELASTIMOLD Dead-end receptacles are fully-shielded, fully-submersible, hot-stick operable, separable insulated connectors designed for energized operation. Suitable for use with 15-kv class loadbreak connectors on systems specified in the electrical ratings for this product. Used to "dead-end" the following Elastimold products: 1601AE bushing insert, 163 series junctions, 163FT feed-thru, 160SOP stand-off plug. Receptacle kit contains 1 dead-end receptacle, 1 tube silicone grease, 1 wiping cloth, shield ground lead, and installation instructions. Kv: 15, Ctn. Qty.: 1, Wt., Lbs.: 1

IN-LINE GROUND CONNECTOR ELASTIMOLD Provides a moisture resistant connection to jacketed cable neutrals or metallic shields. Suitable for use on cables with wire or tape, copper or tinned copper, neutrals or shields in direct buried and vault applications. Current carrying capacity is equal to that of a 1/0 AWG aluminum or #2 AWG copper conductor. Easily and quickly installed; remove approximately 3 1/4" of cable jacket, wrap braid around cable shield and connector assembly, secure braid with clip, assemble molded stem and install mastic pad. All materials are supplied in the kit, no special tools are needed. Ctn. Qty.: 1, Wt., Lbs.: 1

PCJ POWER CABLE JOINT ELASTIMOLD Style 1 (molded housing with basic contact) PCJ is designed for use on power cables with or without an outer jacket. Can be applied directly on these cables without taping. For cables ranging from .640" to 2.120" insulation diameter and conductors from No. 3 AWG compressed to 1250 MCM stranded. Suitable for use on 175 mil. or 220 mil. insulation. Rated for use on power distribution circuits up to 15-kV with a current rating equal to that of the cable on which it is installed. When assembled, the style 1 provides a permanent, full-shielded, full- submersible cable joint for direct burial or vault applications. It can be used to join cable runs on new installations or to repair broken cable runs on existing applications. Desc.: #2 Sol., Ctn. Qty.: 1

PCJ POWER CABLE JOINT ELASTIMOLD Style 1 (molded housing with basic contact) PCJ is designed for use on power cables with or without an outer jacket. Can be applied directly on these cables without taping. For cables ranging from .640" to 2.120" insulation diameter and conductors from No. 3 AWG compressed to 1250 MCM stranded. Suitable for use on 175 mil. or 220 mil. insulation. Rated for use on power distribution circuits up to 15-kV with a current rating equal to that of the cable on which it is installed. When assembled, the style 1 provides a permanent, full-shielded, full- submersible cable joint for direct burial or vault applications. It can be used to join cable runs on new installations or to repair broken cable runs on existing applications. Desc.: #2 Str., Ctn. Qty.: 1

PCJ POWER CABLE JOINT ELASTIMOLD Style 1 (molded housing with basic contact) PCJ is designed for use on power cables with or without an outer jacket. Can be applied directly on these cables without taping. For cables ranging from .640" to 2.120" insulation diameter and conductors from No. 3 AWG compressed to 1250 MCM stranded. Suitable for use on 175 mil. or 220 mil. insulation. Rated for use on power distribution circuits up to 15-kV with a current rating equal to that of the cable on which it is installed. When assembled, the style 1 provides a permanent, full-shielded, full- submersible cable joint for direct burial or vault applications. It can be used to join cable runs on new installations or to repair broken cable runs on existing applications. Desc.: 1/0 Str., Ctn. Qty.: 1

PCJ POWER CABLE JOINT ELASTIMOLD Style 1 (molded housing with basic contact) PCJ is designed for use on power cables with or without an outer jacket. Can be applied directly on these cables without taping. For cables ranging from .640" to 2.120" insulation diameter and conductors from No. 3 AWG compressed to 1250 MCM stranded. Suitable for use on 175 mil. or 220 mil. insulation. Rated for use on power distribution circuits up to 15-kV with a current rating equal to that of the cable on which it is installed. When assembled, the style 1 provides a permanent, full-shielded, full- submersible cable joint for direct burial or vault applications. It can be used to join cable runs on new installations or to repair broken cable runs on existing applications. Desc.: 4/0 Str., Ctn. Qty.: 1

PCJ POWER CABLE JOINT ELASTIMOLD Style 1 (molded housing with basic contact) PCJ is designed for use on power cables with or without an outer jacket. Can be applied directly on these cables without taping. For cables ranging from .640" to 2.120" insulation diameter and conductors from No. 3 AWG compressed to 1250 MCM stranded. Suitable for use on 175 mil. or 220 mil. insulation. Rated for use on power distribution circuits up to 15-kV with a current rating equal to that of the cable on which it is installed. When assembled, the style 1 provides a permanent, full-shielded, full- submersible cable joint for direct burial or vault applications. It can be used to join cable runs on new installations or to repair broken cable runs on existing applications. Desc.: 1/0 Sol., Ctn. Qty.: 1

SILICONE LUBRICANT ELASTIMOLD 5 oz. tube. Pkg. Qty.: 12, Wt., Lbs.: 4

PCE LOADBREAK CONNECTORS ELASTIMOLD Designed for connecting to and operating 15-KV class, 95-kV BIL distribution apparatus where appropriate voltage ratings are not exceeded. Suitable from use on 175 mil. or 220 mil. cable. Elbows will accommodate conductor sizes from No. 3 stranded through 250 kcmil compact stranded and cable diameters from .640" to 1.310". For use on concentric neutral UD cable having an extruded insulation shield. May also be installed on other types of cable using proper ELASTIMOLD cable shield adapter or grounding device. W/ INTEGRAL CABLE SEAL. Desc.: #2 Sol., Ctn. Qty.: 1