Dutton-Lainson Company

ZFORCE ARRESTORS MACLEAN POWER Polymer blend housing is molded directly on the MOV fiberglass wrapped stack for the ultimate seal against moisture. Zinc oxide high performance MOV blocks. Metal enclosed integrated GLD for fast, reliable operation. Polymeric EP-silicone blended compound, formulated for a superior balance of UV, contamination and tracking performance. High strength, glass reinforced polyester insulating bracket. Bird guard can be used for single or Feedthrough connections, and can be installed after lead wire is connected. Crossarm bracket (top mounting) w/back­strap assembly. Top Terminal: standard-four corner clamp and nut. Bottom Terminal: standard-U clamp and nut. HEAVY DUTY. Rated Voltage: 10 kV, MCOV kV: 8.4, Ctn. Qty.: 5

ZFORCE ARRESTORS MACLEAN POWER Polymer blend housing is molded directly on the MOV fiberglass wrapped stack for the ultimate seal against moisture. Zinc oxide high performance MOV blocks. Metal enclosed integrated GLD for fast, reliable operation. Polymeric EP-silicone blended compound, formulated for a superior balance of UV, contamination and tracking performance. High strength, glass reinforced polyester insulating bracket. Bird guard can be used for single or Feedthrough connections, and can be installed after lead wire is connected. Crossarm bracket (top mounting) w/back­strap assembly. Top Terminal: standard-four corner clamp and nut. Bottom Terminal: standard-U clamp and nut. W/O X-ARM BRACKET. Rated Voltage: 10 kV, MCOV kV: 8.4, Ctn. Qty.: 5

ZFORCE ARRESTORS MACLEAN POWER Polymer blend housing is molded directly on the MOV fiberglass wrapped stack for the ultimate seal against moisture. Zinc oxide high performance MOV blocks. Metal enclosed integrated GLD for fast, reliable operation. Polymeric EP-silicone blended compound, formulated for a superior balance of UV, contamination and tracking performance. High strength, glass reinforced polyester insulating bracket. Bird guard can be used for single or Feedthrough connections, and can be installed after lead wire is connected. Crossarm bracket (top mounting) w/back­strap assembly. Top Terminal: standard-four corner clamp and nut. Bottom Terminal: standard-U clamp and nut. HEAVY DUTY. Rated Voltage: 15 kV, MCOV kV: 12.7, Ctn. Qty.: 5

"ZE SERIES" DEAD FRONT ELBOW ARRESTER MACLEAN Dead front elbow arrestor with highly non-linear metal oxide valve elements, incorporates surge protection in a one-piece, shielded elbow housing. It permits installation on standard separable connector bushings, maintaining the dead front concept. Developed specifically for protection of underground distribution systems, it installs at the open point of the underground system to prevent voltage wave doubling. Housing is made of peroxide cured EPDM rubber and is totally shielded with a molded conductive EPDM jacket. The one-piece construction requires no field assembly. REA approved. Voltage (kV): 10, MCOV (kV-RMS): 8.4, Ctn. Qty.: 1

MACLEAN POWER 10KV, 8.4KV MCOV Intermediate arrester. Eyebolt connectors, 8.75" Tripod Mounting base. Ctn. Qty.: 1

ZFORCE ARRESTORS MACLEAN POWER Polymer blend housing is molded directly on the MOV fiberglass wrapped stack for the ultimate seal against moisture. Zinc oxide high performance MOV blocks. Metal enclosed integrated GLD for fast, reliable operation. Polymeric EP-silicone blended compound, formulated for a superior balance of UV, contamination and tracking performance. High strength, glass reinforced polyester insulating bracket. Bird guard can be used for single or Feedthrough connections, and can be installed after lead wire is connected. Crossarm bracket (top mounting) w/back­strap assembly. Top Terminal: standard-four corner clamp and nut. Bottom Terminal: standard-U clamp and nut. HEAVY DUTY. Rated Voltage: 18 kV, Ctn. Qty.: 1

Maclean ZRP003-0000100 Zinc Oxide Riser Pole 10kA Polymer Arester, 3/8" x 16 SSTL Studs, 03 Duty-Cycle Rating, Standard Insulating Bracket, with GLD, No NEMA Brackets, Standard - Four corner SSTL clamp and nut, With Cap, Standard - "U" clamp and nut

POLYMER HOUSED ARRESTER-RISER TYPE MACLEAN POWER A current-responsive metal-oxide type device, with a simple and compact design for riserpole applications. Unit is described by its maximum continuous line-to-ground operating voltage (MCOV) because the most important application criterion is the maximum voltage which can be continuously applied. Clamping band, ground lead isolator, nut and wire clamp, and nut, wire clamp and protective cover included. 11-1/2" high. MCOV kV: 7.6, Ctn. Qty.: 1

COPPER GROUND STRAP 12" overall length. Size: 12", Ctn. Qty.: 1

COPPER GROUND STRAP 12" overall length. Size: 8", Ctn. Qty.: 1

POLYMER HOUSED ARRESTER-RISER TYPE MACLEAN POWER A current-responsive metal-oxide type device, with a simple and compact design for riserpole applications. Unit is described by its maximum continuous line-to-ground operating voltage (MCOV) because the most important application criterion is the maximum voltage which can be continuously applied. Clamping band, ground lead isolator, nut and wire clamp, and nut, wire clamp and protective cover included. 11-1/2" high. MCOV kV: 8.4, Ctn. Qty.: 1

ZFORCE ARRESTORS MACLEAN POWER Polymer blend housing is molded directly on the MOV fiberglass wrapped stack for the ultimate seal against moisture. Zinc oxide high performance MOV blocks. Metal enclosed integrated GLD for fast, reliable operation. Polymeric EP-silicone blended compound, formulated for a superior balance of UV, contamination and tracking performance. High strength, glass reinforced polyester insulating bracket. Bird guard can be used for single or Feedthrough connections, and can be installed after lead wire is connected. Crossarm bracket (top mounting) w/back­strap assembly. Top Terminal: standard-four corner clamp and nut. Bottom Terminal: standard-U clamp and nut. HEAVY DUTY. Rated Voltage: 3 kV, MCOV kV: 2.55, Ctn. Qty.: 5

"ESA" ELBOW SURGE ARRESTER ELASTIMOLD 15 kV-class (w/8.4kV MCOV) elbow surge arrester with a 10 kV duty cycle rating. Features include molded shield of 1/8" conductive EPDM, molded 0-ring, operating eye with interlocking tabs, metal oxide valve elements, positive end seal with compression-fit grip, grounding eye. Copper current shunt at both ends of valve elements. High-strength stainless steel cap. Insulation is EPDM especially compounded for minimal compression set and high reliability. Tin-plated copper probe with Belleville washers and arc-follower made of arc-quenching material. Ground lead is #4 AWG bare copper, flexible rope lay 36" long with tinned end. Ctn. Qty.: 1

BUSHING ARRESTER ELASTIMOLD For use anywhere in the underground distribution circuit to provide increased surge protection. Mounts directly to a transformer bushing well. Compact design allows bushing arrester to fit within existing mini-pad transformer cabinetry. A fully shielded loadbreak bushing with an integrally molded MOV arrester. Rated for 200A switching and 10,OOOA fault-close on single phase and three-phase circuits. Designed with an all-copper primary current path, exceeds published industry standards for current carrying capability. Installed with the transformer de-energized using a 200AT which assures proper assembly torque. KVs: 10, Ctn. Qty.: 1

PARKING STAND ARRESTER ELASTIMOLD An arrester combined with an insulated parking bushing that can be mounted on a translormer parking stand. Typically used at the open point transformer of a loop-feed distribution circuit to park the disconnected elbow connector. MCOV: 8.4, Ctn. Qty.: 4