Dutton-Lainson Company

Three Gang Box Cover, 13.5 Cubic Inches, 8-13/16 Inches Long x 4-11/16 Inches Wide x 13/16 Inches Raised for Plaster, Galvanized Steel, Holes between Gangs are Spaced on 13/16 Inch Centers, Tapped Holes in Ears, Spaced on 3-9/32 Inches Centers to Accommodate All Standard Receptacles and Switches, Furnished with Extra Plugged Screw Holes, if these Screw Holes are Used, the Cover will fit the Next Smaller Size Box

Octagon Box Cover, 4 Inch Diameter, Pre-Galvanized Steel, Flat and Blank, For use with Octagon Boxes

Octagon Box Cover, 4 Inch Diameter, 1/2 Inch Knockouts, Pre-Galvanized Steel, Flat, For use with Octagon Boxes

Single Gang Octagon Box Cover, 3.5 Cubic Inches, 4 Inch Diameter x 5/8 Inch Raised, Pre-Galvanized Steel, Center Blanked with Tapped Ears on 2-3/4 Inch Centers, For use with Round Boxes

Octagon Box Cover, 4 Inch Diameter, Pre-Galvanized Steel, Flat and Center Blanked for Duplex Receptacle, For use with Round and Octagon Boxes, pack of 25, for Retail

Pre-galvanized steel box flat cover 3-1/2 Inch diameter for use with round and octagon boxes

Box Cover, 3-1/2 Inch Diameter, 1/2 Inch Knockouts, Pre-Galvanized Steel, Flat, For use with Round and Octagon Boxes, pack of 25, for Retail

4 Inch Pre-galvanized steel square box cover, 5/8 Inch raised, 4.3 cuin. Center blanked with tapped ears on 2-3/4 Inch centers.

Square Box Cover, 4 Inch Square, Pre-Galvanized Steel, Flat and Blank

Square Box Cover, 4 Inch Square x 1 Inch Raised, 1/2 Inch Knockout, Pre-Galvanized Steel, Flat

4 Inch Pre-galvanized steel square box cover, 1/2 Inch raised, 3.5 cuin. Center blanked with tapped ears on 2-3/4 Inch centers.

Square Box Surface Cover, 5 Cubic Inches, 4 Inch Square x 1/2 Inch Deep, Galvanized Steel, For use with One Ground Fault Receptacle

Square Box Surface Cover, 5 Cubic Inches, 4 Inch Square x 1/2 Inch Deep, Galvanized Steel, For use with Two Ground Fault Receptacles

Square Box Surface Cover, 5 Cubic Inches, 4 Inch Square x 1/2 Inch Deep, Galvanized Steel, For use with One Ground Fault Receptacle and One Toggle Switch

Square Box Surface Cover, 5 Cubic Inches, 4 Inch Square x 1/2 Inch Deep, Galvanized Steel, For use with One Ground Fault Receptacle and One Duplex Receptacle

One Gang Square Device Cover, 3 Cubic Inches, 4 Inch Square x 1/2 Inch Raised, Pre-Galvanized Steel