Dutton-Lainson Company

WING TYPE CLUSTER MOUNT ALUMAFORM Mounts three, 3-50 kVA units (1,000 lbs./phase @ 18" moment) with 12" EEI/NEMA lug spacing. Preassembled, bolted 6061-T6 aluminum alloy construction. One piece rigid frame. Mounts to pole on 13 1/2" hole centers using two 3/4" through-bolts (not supplied). Furnished with 5/8" transformer mounting hardware. Ctn. Qty.: 1, Wt., Lbs.: 22

CLUSTER MOUNTS ALUMAFORM Aluminum alloy. Ground wire clamps are furnished. Sufficient hot dip galvanized transformer mounting bolts, nuts and lock washers furnished. Adjustable. Easy to install. Light, preassembled. Corrosion resistant. Simple and safe. Installation instruction sheet and pole measuring tape furnished. No.6M3-6: Mounts three 3KVA through 50 KVA transformers (latest standards), any combination of 12" EEI-NEMA type A lugs. No. adapter plates required. 6" mounting distance from pole 2000 lb. load tested per position. KVA's: 3-50, Ctn. Qty.: 1, Ctn. Wt.: 16 1/2

CLUSTER MOUNTS ALUMAFORM Aluminum alloy. Ground wire clamps are furnished. Sufficient hot dip galvanized transformer mounting bolts, nuts and lock washers furnished. Adjustable. Easy to install. Light, preassembled. Corrosion resistant. Simple and safe. Installation instruction sheet and pole measuring tape furnished. No.15M3-6: Mounts three 3 KVA through 100 KVA transformers, any combination of 12" or 24" EEI-NEMA type A and B lugs. If adapter plates are used 167 KVA and larger transformers can be mounted. 6" mounting distance from pole. 5000 lb. load tested per position. KVA's: 3-100, Ctn. Qty.: 1, Ctn. Wt.: 31

GROUNDING CONNECTOR BLACKBURN Transformer ground connectors are cast of high conductivity bronze. 1/2-13 stud fits all standard EEI-NEMA distribution transformers. Eye bolt rotates to accommodate cable in either vertical or horizontal direction. One size connector to handle full range of grounding conductors from #8 to #2/0 str. Easily tightened in transformer tank with same wrench used for tightening conductor connector. 100 per carton. Wire Range Max.-Min.: 2/0 Str.-8 Sol.

TRANSFORMER TRAINER BRACKET JOSLYN Bracket is clamped to bottom edge of transformer tank to provide an insulated support for the secondary leads. Bolt end is fitted with polyethylene cap. Each bracket complete with insulator. REA accepted. Mach. Bolt: 1/2" x 6", Insulator: Class 53-2, Ctn. Qty.: 10

TRANSFORMER TRAINER BRACKET JOSLYN Bracket is clamped to bottom edge of transformer tank to provide an insulated support for the secondary leads. Bolt end is fitted with polyethylene cap. Each bracket complete with insulator. REA accepted. Mach. Bolt: 1/2" x 4 1/2", Insulator: Class 53-1, Ctn. Qty.: 15

TANK GROUND CONNECTOR MACLEAN Standard 1/2-13 UNC-2A thread studs and flat surfaces allow for single wrench installation to ground distribution transformer tanks and other apparatus. Vice type design can be installed with a ratchet winch on an unbroken ground wire, eliminating the chance of a loose connection due to "splicing" of the ground wire. Bolt thread: 5/16. Bolt hex head 9/16. Cond. Range: 8 SOL, 1/0 STR, Pkg. Qty.: 50

TANK GROUND CONNECTOR MACLEAN Standard 1/2-13 UNC-2A thread studs and flat surfaces allow for single wrench installation to ground distribution transformer tanks and other apparatus. Vice type design can be installed with a ratchet winch on an unbroken ground wire, eliminating the chance of a loose connection due to "splicing" of the ground wire. Bolt thread: 5/16. Bolt hex head 9/16. 3/8" Internal Thread

CLUSTER MOUNT BRACKET JOSLYN Supports 3 KVA - 50 KVA. Furnished with six each 5/8" x 1 3/4" machine bolts with nuts and split lock washers for mounting three single phase transformers with EEI-NEMA Class "A" mounting lugs. 1 1/4" hole in back plate for hoisting assembly. Bracket is mounted to pole with two 3/4" through bolts. Ctn. Qty.: 1, Wt., Lbs.: 37.5

CLUSTER MOUNT BRACKET JOSLYN J6866 features 24" mounting hole spacing 75 to 333 KVA; each position is designed to accommodate ANSI type "B" lug spacing. (6) 3/4 x 3" machine bolts included for bolting transformers to rack; strength capacity of 5000 per position. Ctn. Qty.: 1, Wt., Lbs.: 78

Maclean 7106A0025 Type "C" Mounting Bracket

ARRESTER BRACKET MACLEAN The type N arrester bracket is used to mount a Z Force arrester to the side of conventional transformer tank. 9/16" x 2 1/4" mounting slots allow for easy positioning of arrester. Bracket is 10 1/8" long.

BAYONET DRIP SHIELD HOWARD INDUSTRIES The Howard Industries Drip Guard is intended for use with sidewall mounted drawout expulsion fuse holders to prevent transformer fluid from dripping on the ground or coming in contact with rubber connector components, arresters, and cable when the fuse is removed. Ctn. Qty.: 1

TRANSFORMER SECONDARY SPADES WARCO Spades are tin plated aluminum alloy and measure 3/8" thick. Thread Size: 5/8", Pad: 4 hole NEMA

TRANSFORMER SECONDARY SPADES WARCO Spades are tin plated aluminum alloy and measure 3/8" thick. Thread Size: 1", Pad: 4 hole NEMA

EYEBOLT TERMINAL LUG PENN UNION A practical and highly versatile connector that may be used for numerous applications.