Dutton-Lainson Company

EQUIPMENT MOUNT ALUMA-FORM Heavy duty, 3-phase equipment mount designed to support arrestors of both intermediate and distribution types, disconnecting devices or potheads. Adjustable to provide 20 forward inclination or hook-stick switches or potheads. Six distribution arrestors can be mounted. Mounts on wood poles with two 5/8" thru-bolts and two lag screws (not furnished). Four device included. Ctn. Qty.: 1, Wt., Lbs.: 18

SINGLE PHASE BRACKET ALUMA-FORM A single position bracket for thru-bolt mounting on wood poles. For distribution cutouts, arrestors and potheads. 5/8" thru-bolt recommended for installation. 5" high back plate is drilled to receive 1/2" lag screw. Two brackets may be mounted back-to-back on same thru-bolt. #4 solid aluminum pigtail provided for ground connection. Pkg. Qty.: 1, Wt., Lbs.: 2.5

THREE PHASE TERMINATOR-ARRESTER MOUNTS ALUMAFORM Mounts with 5/8" thru-bolt and 1/2" lag screw (not included). Equipment mounting hardware and grounding device included. 26° angle standard. Ctn. Qty.: 1

CABLE POSITIONER ALUMA FORM Easily installed, consists of an aluminum saddle, a polyurethane foam cushion with pressure sensitive rubber resin adhesive mounting surface, and a helically cut polyethylene cable tie. Universally accepts outside cable diameters from .75" to 2.0". Ctn. Qty.: 36, Wt., Lbs.: 1

Aluma-Form R3CSA-48 45 Degrees A heavy duty, 3 phase equipment mount designed to support arresters of both intermediate and distribution types, 600 amp disconnecting devices, or terminations.

MOUNTING BRACKET MACLEAN For mounting combination cutout and arrestor to a NEMA "L" bracket or mounting angle. 1 3/8" x 1/4" hex head bolt with flat washer and hex nut. Two 11/16" slots (for mounting). 3/8" x 1 1/2" carriage bolts, lock washers and nuts. Carriage bolts space 3 3/8" to 5 5/6" apart. Hot dip galv. finish. Complete with grounding connector. Voltage: 3/8" x 2" F.B., Pkg. Qty.: 10

MOUNTING BRACKETS JOSYLN For single-hole, lug-mounted PSC cable terminals. Ctn. Qty.: 25, Wt., Lbs.: 2.68

SUPPORT PERMANENT JUNIOR GRIPS ECONOMY CABLE GRIP CO. Single "U" eye, single weave, variable mesh; for service drop cables. Flexible mesh to stranded tinned bronze wire. Used for permanently supporting all types of service cables suspended from poles to houses, buildings, construction sites, towers, elevator shafts, subways and other service entrances of cables. Single weave exerts positive "Vise-Tite" gripping strength. Endless weave provides smooth cable-hugging ends for obstruction-free installation and passage. Minimum breaking strength: 1,300 lbs. Cable Dia. Range, In.: 1"-1 1/8", DE: 9", M: 9 1/2", Wt., Lbs. Per 100: 15

TUFF-STICK MARKERS SHAKESPEARE One-piece, fiberglass reinforced composite markers, easily installed into almost any terrain. Weather resistant, ultraviolet resistant and temperature stable. Flexible enough to withstand repeated impacts without breaking. Flame resistant in accordance with ASTM D635. Flat on two sides. Height: 72", Color: Red, Ctn. Qty.: 1

MOUNTING BRACKET MACLEAN For use on round or flat poles. For mounting vertical insulators, cut-outs or arrestors, spacer cable suspension and flood light mounting bracket. Also used as an insulator adapter bracket. Ductile iron, hot dip galvanized. Lgth.: 18", Ctn. Qty.: 4

SINGLE PHASE/TRIPLE POSITION BRACKET MACLEAN Fiberglass, MPS gray ultraviolet protective coating. 15 degrees standoff cut-out and arrestor bracket. Accepts 5/8" mounting hardware.

EQUIPMENT MOUNT HARDWARE KIT MACLEAN Hardware kit for mounting cutouts, arresters, etc. to equipment mounts. Kit includes: 3 ea. 1/2 x 2" carriage bolts, lockwashers & hex nuts.

SILICONE LUBRICANT ELASTIMOLD 5 oz. tube. Pkg. Qty.: 12, Wt., Lbs.: 4

TERMINATION MOUNTING BRACKETS 3M Cable Range: 0.80"-1.25" OD, Ctn. Qty.: 1

ABB JB-1 Cable Support Brackets, Single Clamp, .80 inch-1.25 inch (20-32 mm), Plated Mild Steel

TERMINATION MOUNTING BRACKETS 3M Cable Range: 1.10"-1.50" OD, Ctn. Qty.: 1