Dutton-Lainson Company

Blackburn SAPT-4-26 SAPT Compression Pin Terminal, 4/0 AWG Conductor, Die Code: TU, 52, BG, 243, 5/8, 2 in Dia x 6 in L Pin, Aluminum/Copper

Blackburn SAPT-2-26 SAPT Compression Pin Terminal, 2 to 1 AWG, 1/0 AWG Conductor, Die Code: TU, 52, BG, 243, 5/8, 2 in Dia x 6 in L Pin, Aluminum/Copper

Blackburn Compression Pin Terminal, Series: SAPT, 1/0 AWG Conductor, Die Code: TU, 52, BG, 243, 5/8, 2 in Pin Dia, 6 in Pin Length, Stranded/Solid, Aluminum/Copper

Blackburn Compression Pin Terminal, Series: SAPT, 4/0 AWG Conductor, Die Code: TX/76/249/840/11A, 0.325 in Pin Dia, 6 in Pin Length, TiN Coated, Aluminum/Copper

EQUIPMENT MOUNT ALUMA-FORM Heavy duty, 3-phase equipment mount designed to support arrestors of both intermediate and distribution types, disconnecting devices or potheads. Adjustable to provide 20 forward inclination or hook-stick switches or potheads. Six distribution arrestors can be mounted. Mounts on wood poles with two 5/8" thru-bolts and two lag screws (not furnished). Four device included. Ctn. Qty.: 1, Wt., Lbs.: 18

SINGLE PHASE BRACKET ALUMA-FORM A single position bracket for thru-bolt mounting on wood poles. For distribution cutouts, arrestors and potheads. 5/8" thru-bolt recommended for installation. 5" high back plate is drilled to receive 1/2" lag screw. Two brackets may be mounted back-to-back on same thru-bolt. #4 solid aluminum pigtail provided for ground connection. Pkg. Qty.: 1, Wt., Lbs.: 2.5

THREE PHASE TERMINATOR-ARRESTER MOUNTS ALUMAFORM Mounts with 5/8" thru-bolt and 1/2" lag screw (not included). Equipment mounting hardware and grounding device included. 26° angle standard. Ctn. Qty.: 1

CABLE POSITIONER ALUMA FORM Easily installed, consists of an aluminum saddle, a polyurethane foam cushion with pressure sensitive rubber resin adhesive mounting surface, and a helically cut polyethylene cable tie. Universally accepts outside cable diameters from .75" to 2.0". Ctn. Qty.: 36, Wt., Lbs.: 1

Aluma-Form R3CSA-48 45 Degrees A heavy duty, 3 phase equipment mount designed to support arresters of both intermediate and distribution types, 600 amp disconnecting devices, or terminations.

MOUNTING BRACKET MACLEAN For mounting combination cutout and arrestor to a NEMA "L" bracket or mounting angle. 1 3/8" x 1/4" hex head bolt with flat washer and hex nut. Two 11/16" slots (for mounting). 3/8" x 1 1/2" carriage bolts, lock washers and nuts. Carriage bolts space 3 3/8" to 5 5/6" apart. Hot dip galv. finish. Complete with grounding connector. Voltage: 3/8" x 2" F.B., Pkg. Qty.: 10

MOUNTING BRACKETS JOSYLN For single-hole, lug-mounted PSC cable terminals. Ctn. Qty.: 25, Wt., Lbs.: 2.68

ZFORCE ARRESTORS MACLEAN POWER Polymer blend housing is molded directly on the MOV fiberglass wrapped stack for the ultimate seal against moisture. Zinc oxide high performance MOV blocks. Metal enclosed integrated GLD for fast, reliable operation. Polymeric EP-silicone blended compound, formulated for a superior balance of UV, contamination and tracking performance. High strength, glass reinforced polyester insulating bracket. Bird guard can be used for single or Feedthrough connections, and can be installed after lead wire is connected. Crossarm bracket (top mounting) w/back­strap assembly. Top Terminal: standard-four corner clamp and nut. Bottom Terminal: standard-U clamp and nut. HEAVY DUTY. Rated Voltage: 10 kV, MCOV kV: 8.4, Ctn. Qty.: 5

ZFORCE ARRESTORS MACLEAN POWER Polymer blend housing is molded directly on the MOV fiberglass wrapped stack for the ultimate seal against moisture. Zinc oxide high performance MOV blocks. Metal enclosed integrated GLD for fast, reliable operation. Polymeric EP-silicone blended compound, formulated for a superior balance of UV, contamination and tracking performance. High strength, glass reinforced polyester insulating bracket. Bird guard can be used for single or Feedthrough connections, and can be installed after lead wire is connected. Crossarm bracket (top mounting) w/back­strap assembly. Top Terminal: standard-four corner clamp and nut. Bottom Terminal: standard-U clamp and nut. W/O X-ARM BRACKET. Rated Voltage: 10 kV, MCOV kV: 8.4, Ctn. Qty.: 5

ZFORCE ARRESTORS MACLEAN POWER Polymer blend housing is molded directly on the MOV fiberglass wrapped stack for the ultimate seal against moisture. Zinc oxide high performance MOV blocks. Metal enclosed integrated GLD for fast, reliable operation. Polymeric EP-silicone blended compound, formulated for a superior balance of UV, contamination and tracking performance. High strength, glass reinforced polyester insulating bracket. Bird guard can be used for single or Feedthrough connections, and can be installed after lead wire is connected. Crossarm bracket (top mounting) w/back­strap assembly. Top Terminal: standard-four corner clamp and nut. Bottom Terminal: standard-U clamp and nut. HEAVY DUTY. Rated Voltage: 15 kV, MCOV kV: 12.7, Ctn. Qty.: 5

"ZE SERIES" DEAD FRONT ELBOW ARRESTER MACLEAN Dead front elbow arrestor with highly non-linear metal oxide valve elements, incorporates surge protection in a one-piece, shielded elbow housing. It permits installation on standard separable connector bushings, maintaining the dead front concept. Developed specifically for protection of underground distribution systems, it installs at the open point of the underground system to prevent voltage wave doubling. Housing is made of peroxide cured EPDM rubber and is totally shielded with a molded conductive EPDM jacket. The one-piece construction requires no field assembly. REA approved. Voltage (kV): 10, MCOV (kV-RMS): 8.4, Ctn. Qty.: 1

MACLEAN POWER 10KV, 8.4KV MCOV Intermediate arrester. Eyebolt connectors, 8.75" Tripod Mounting base. Ctn. Qty.: 1