Dutton-Lainson Company

Hot dip galvanized. Rolled threads. Square nuts and heads. Made to E.E.I. specification TD-1. Lgth. In.: 20, Dia.: 3/4", Thrd Lgth., In.: 6

Hot dip galvanized, rolled threads, square nuts and heads. Made to E.E.I specification TD-1. Over all length is 20 inches, diameter is 3/4 inch and thread length is 6 inches

SECONDARY SURGE ARRESTER MACLEAN Metal oxide, 650V lightning protective device designed to limit surge voltages by discharging or by-passing surge current to ground. Designed for grounded systems on which the maximum line-to-ground voltage does not exceed 650V rms at frequencies between 48 to 62 Hz. Patent pending design achieves a fault with-stand capability of 10 kA rms without the use of any external fusing. Unit comes with 18", #14AWG solid copper wire leads. Cover is ultrasonically welded to the housing and wire entry points are sealed to prevent moisture entry. Arrestor may be mounted outdoors as well as indoors. Includes a 3/4" locknut for knockout mounting. Poles: 2, Ctn. Qty.: 10

SECONDARY SURGE ARRESTER MACLEAN Metal oxide, 650V lightning protective device designed to limit surge voltages by discharging or by-passing surge current to ground. Designed for grounded systems on which the maximum line-to-ground voltage does not exceed 650V rms at frequencies between 48 to 62 Hz. Patent pending design achieves a fault with-stand capability of 10 kA rms without the use of any external fusing. Unit comes with 18", #14AWG solid copper wire leads. Cover is ultrasonically welded to the housing and wire entry points are sealed to prevent moisture entry. Arrestor may be mounted outdoors as well as indoors. Includes a 3/4" locknut for knockout mounting. Poles: 3, Ctn. Qty.: 10

MOUNTING BRACKET MACLEAN For mounting combination cutout and arrestor to a NEMA "L" bracket or mounting angle. 1 3/8" x 1/4" hex head bolt with flat washer and hex nut. Two 11/16" slots (for mounting). 3/8" x 1 1/2" carriage bolts, lock washers and nuts. Carriage bolts space 3 3/8" to 5 5/6" apart. Hot dip galv. finish. Complete with grounding connector. Voltage: 3/8" x 2" F.B., Pkg. Qty.: 10

MOUNTING BRACKETS JOSYLN For single-hole, lug-mounted PSC cable terminals. Ctn. Qty.: 25, Wt., Lbs.: 2.68

Hot dip galvanized. 5/8" & 3/4" diameter. Length Shank: 9 x 5/8, Std. Pkg.: 25, Wt., Lbs. Per 100: 140

Hot dip galvanized. 5/8" & 3/4" diameter. Length Shank: 10 x 5/8, Std. Pkg.: 25, Wt., Lbs. Per 100: 146

Hot dip galvanized. 5/8" & 3/4" diameter. Length Shank: 10 x 3/4, Std. Pkg.: 25, Wt., Lbs. Per 100: 190

Hot dip galvanized. 5/8" & 3/4" diameter. Length Shank: 12 x 3/4, Std. Pkg.: 25, Wt., Lbs. Per 100: 220

Hot dip galvanized. 5/8" & 3/4" diameter. Length Shank: 14 x 3/4, Std. Pkg.: 20, Wt., Lbs. Per 100: 230

ZFORCE ARRESTORS MACLEAN POWER Polymer blend housing is molded directly on the MOV fiberglass wrapped stack for the ultimate seal against moisture. Zinc oxide high performance MOV blocks. Metal enclosed integrated GLD for fast, reliable operation. Polymeric EP-silicone blended compound, formulated for a superior balance of UV, contamination and tracking performance. High strength, glass reinforced polyester insulating bracket. Bird guard can be used for single or Feedthrough connections, and can be installed after lead wire is connected. Crossarm bracket (top mounting) w/back­strap assembly. Top Terminal: standard-four corner clamp and nut. Bottom Terminal: standard-U clamp and nut. HEAVY DUTY. Rated Voltage: 10 kV, MCOV kV: 8.4, Ctn. Qty.: 5

ZFORCE ARRESTORS MACLEAN POWER Polymer blend housing is molded directly on the MOV fiberglass wrapped stack for the ultimate seal against moisture. Zinc oxide high performance MOV blocks. Metal enclosed integrated GLD for fast, reliable operation. Polymeric EP-silicone blended compound, formulated for a superior balance of UV, contamination and tracking performance. High strength, glass reinforced polyester insulating bracket. Bird guard can be used for single or Feedthrough connections, and can be installed after lead wire is connected. Crossarm bracket (top mounting) w/back­strap assembly. Top Terminal: standard-four corner clamp and nut. Bottom Terminal: standard-U clamp and nut. W/O X-ARM BRACKET. Rated Voltage: 10 kV, MCOV kV: 8.4, Ctn. Qty.: 5

ZFORCE ARRESTORS MACLEAN POWER Polymer blend housing is molded directly on the MOV fiberglass wrapped stack for the ultimate seal against moisture. Zinc oxide high performance MOV blocks. Metal enclosed integrated GLD for fast, reliable operation. Polymeric EP-silicone blended compound, formulated for a superior balance of UV, contamination and tracking performance. High strength, glass reinforced polyester insulating bracket. Bird guard can be used for single or Feedthrough connections, and can be installed after lead wire is connected. Crossarm bracket (top mounting) w/back­strap assembly. Top Terminal: standard-four corner clamp and nut. Bottom Terminal: standard-U clamp and nut. HEAVY DUTY. Rated Voltage: 15 kV, MCOV kV: 12.7, Ctn. Qty.: 5

"ZE SERIES" DEAD FRONT ELBOW ARRESTER MACLEAN Dead front elbow arrestor with highly non-linear metal oxide valve elements, incorporates surge protection in a one-piece, shielded elbow housing. It permits installation on standard separable connector bushings, maintaining the dead front concept. Developed specifically for protection of underground distribution systems, it installs at the open point of the underground system to prevent voltage wave doubling. Housing is made of peroxide cured EPDM rubber and is totally shielded with a molded conductive EPDM jacket. The one-piece construction requires no field assembly. REA approved. Voltage (kV): 10, MCOV (kV-RMS): 8.4, Ctn. Qty.: 1

MACLEAN POWER 10KV, 8.4KV MCOV Intermediate arrester. Eyebolt connectors, 8.75" Tripod Mounting base. Ctn. Qty.: 1