Dutton-Lainson Company

FITALL FUSE LINKS INDEL BAURU Specially designed for transformer protection, each employ dual element construction. Provides excellent surge withstand to avoid nuisance blowing from lightning and switching surges. Nominal speed ration is 32. TYPE IX LINKS. Ampere Rating: 4, Ctn. Qty.: 10

FITALL FUSE LINKS INDEL BAURU Specially designed for transformer protection, each employ dual element construction. Provides excellent surge withstand to avoid nuisance blowing from lightning and switching surges. Nominal speed ration is 32. TYPE IX LINKS. Ampere Rating: 7, Ctn. Qty.: 10

FITALL FUSE LINKS INDEL BAURU Specially designed for transformer protection, each employ dual element construction. Provides excellent surge withstand to avoid nuisance blowing from lightning and switching surges. Nominal speed ration is 32. TYPE IX LINKS. Ampere Rating: 10, Ctn. Qty.: 10

PEDESTAL CONNECTOR UTILCO Insulated pedestal connector 2 conductor #10-350. Connector entry from both sides. Conductor Size: #10-350

Utilco PED11-1/0SSP Streetwise Street Light Connector, Dual Rated, Direct Bury, Conductor Range 1/0-14, 1 Port Line Side, 1 Port Load Side, ANSI, With De-Ox

ALUMINUM PEDESTAL TERMINAL COVER UTILCO Type NA aluminum pedestal terminal for copper and aluminum conductors. Supplied with plain finish and grease inhibitor. All socket set screws accept a 5/16" hex Allen wrench. Fabricated from 6061-T6 aluminum. COVER. Fits: PL350-6P, Ctn. Qty.: 1

CONNECTOR UTILCO Transformer eyebolt connector with 1/2 stud. Adapts eyebolt to set screw connector for multiple conductors. Conductor: 4 ea. #10-350, Ctn. Qty.: 24

TRANSFORMER CONNECTOR UTILCO Insulated stud-mounted transformer connector for aluminum or copper conductors. CO-OX oxide inhibitor in all conductor holes and stud-mounting hole. Order by each. W/O COVER. No. of Cond.: 4, Cond. Range: 350-1, Stud Size: 5/8"

TRANSFORMER CONNECTOR UTILCO Insulated stud-mounted transformer connector for aluminum or copper conductors. CO-OX oxide inhibitor in all conductor holes and stud-mounting hole. Order by each. No. of Cond.: 4, Cond. Range: 350-10, Stud Size: 5/8"

TRANSFORMER CONNECTOR UTILCO Insulated stud-mounted transformer connector for aluminum or copper conductors. CO-OX oxide inhibitor in all conductor holes and stud-mounting hole. Order by each. No. of Cond.: 4, Cond. Range: 500-10, Stud Size: 1"

TYPE NACC CONNECTOR UTILCO Clear insulated secondary connector, dual rated for aluminum or copper conductors. Includes CO-OX oxide inhibitor. Supplied with radial-tipped set screws. Fully tested to ANSI 119.4 for class A connectors. REA approved. No. of Cond.: 8, Cond. Range AWG: 350-10, Pkg. Qty.: 1

PEDESTAL CONNECTOR UTILCO Insulated pedestal connector 2 conductor #10-350. Connector entry from both sides.

PEDESTAL CONNECTOR UTILCO Insulated pedestal connector 2 conductor #10-350. Connector entry from both sides.

Utilco BLL-WO-I Lineman 6 Ton Battery Hydraulic In-Line Dieless Crimping Tool With O-Nose Die

LOADBREAK BUSHING INSERTS ELASTIMOLD Bushing insert is designed to provide the apparatus interface for loadbreak connectors. Loadbreak bushing insert can be used on apparatus equipped with Elastimold universal bushing wells: K1601PC-L15,Kl601PC-S1, or on 600-amp reducing tap wells: 600RTW, 600RTWS.Designed to mate with the following Elastimold products: 165LR, 166LR, 160DR,370TR, 160GLR. Does not require the use of any special tools for installation. For use on 3-phase systems either 3-wire or 4-wire, ungrounded or grounded,which have a max. phase-to-ground voltage of 8.3 kv and which are nominally designated 15-kv class; single phase laterals of 3-phase systems described above; 14.4 kv across the contacts during the switching operation (loadmake, loadbreak, or fault close). Nom. Kv.: 15, Ctn. Qty.: 1, Wt., Lbs.: 2

LOADBREAK FEED-THRU INSERT ELASTIMOLD Loadbreak feed-thru insert provides an external loop through feature for single well transformers or radial transformers. Bushing alignment feature provides exact insert positioning without backing out of the bushing well. Ensures maximum current carrying ability and superior dielectric joint. Amflex(TM) contacts: commutating piston contact provides the ability to move while maintaining electrical contact. Elastimold thermoplastic switching material has highest temperature withstand and solvent resistance of proposed "standard" arc quenching materials. Welded connections: welded bus bar offers a more reliable current carrying connection. Thick molded rubber shield. Teflon-coated. Nom. Kv: 15, Ctn. Qty.: 1, Wt., Lbs.: 5