Dutton-Lainson Company

GUY BOND CLAMPS MACLEAN POWER SYSTEMS Hot dip galvanized. When the down guy is used as a ground, guy bond clamps are used with strand-eye rods to maintain a firm contact between the guy strand and the guy rod. For forged eye and expanding type anchors. Desc.: Thimbleye, Strand Size: 1/4-3/8, Std. Pkg.: 250, Wt., Lbs. Per 100: 18

GUY BOND CLAMPS MACLEAN POWER SYSTEMS Hot dip galvanized. When the down guy is used as a ground, guy bond clamps are used with strand-eye rods to maintain a firm contact between the guy strand and the guy rod. For forged eye and expanding type anchors. Desc.: Tripleye, Strand Size: 1/4-1/2, Std. Pkg.: 100, Wt., Lbs. Per 100: 25

Drive hooks with Pilot points and screw hooks. Hot dip galvanized. Size, In.: 7/16 x 5 1/4, Desc. of Hook: Drive, Wt., Lbs. Pkg.: 200

Wide Base Clamp Pin. Hot dip galvanized, made of open hearth steel, drop forged in one piece that is free of any welds that would weaken the forging. Broad base distributes the load while the formed saddle combined with the clamp assembly or strap insures that the pin will not slip or twist once it is mounted. For crossarm size: 3 3/4 x 4 3/4". Also fits 3 5/8" x 4 5/8" REA Standard crossarm. Nylon Thread: 1", Std. Pkg.: 5, Wt., Lbs.: 4.9

Spring Washer. Hot dip galvanized. Use to keep units in tension when wood crossarm shrinkage occurs. Washers are shaped so that nut of the bolt seats on flat surface when tightened. For Bolt Dia.: 3/4", Pkg. Qty.: 50

ANGLE THIMBLEYELET JOSYLN Used for down guys. Compatible with the strength of the bolts used wilh them. Hot dip galvanized. Max. strand size: 1/2" Rea. accepted. For Bolt: 5/8"D, Pkg.Qty.: 1

Thimble Eyenuts. Tapped to fit hot dip galvanized bolts made to ANSI Specs and are designed to develop strength ratings consistent with the bolts with which they are used. Used for span, head and stub guying. REA accepted. For Bolt Dia.: 5/8", Max. Str. Size: 1/2" Ctn. Qty.: 50

GUY ATTACHMENTS MACLEAN POWER SYSTEMS One bolt guy attachment. Hot dip galvanized. Wherever possible, use with machine bolt. Hole size, 11/16". Steel size, 2 x 1/8". Size: 11/16", Hole Size: 2" x 1/8", Std. Pkg.: 100, Wt., Lbs. Per 100: 80

Gardner Bender WSP-100E Cable Puller, Steel Hand Wire Caddy

LOCKING PLIERS VISE-GRIP Curved jaw locking pliers with wire cutter. Heavy duty tool for maximum strength and gripping capacity. Size: 10", Ctn. Qty.: 1

LOCKING PLIERS VISE-GRIP Long nose locking pliers with wire cutter. Long enough to reach tight spots and small enough to grip tiny objects. Size: 9", Ctn. Qty.: 1

STEP DRILL IRWIN Self-starting multiple holes. 1/8" to 1/2" hole sizes. 1/4" shank size. 1/8" step thickness. For use with steel, copper, brass aluminum and other thin metals. Also drills through wood, composition board, even plexiglass and plastics. Size: 1/8" to 1/2", Ctn. Qty.: 1

WELDED SCREW ANCHORS MACLEAN POWER SYSTEMS Hot dip galvanized. Incorporates features that make this anchor easy to install, strong and corrosion-resistant. Sharp cutting edge on the helix. Chisel point helps anchor work its way around rocks and other obstructions. 3/4" rod diameter. REA No. Z. Helix Dia.: 4", Rod Lgth.: 4'6", Std. Pkg.: 5, Wt., Lbs. Per 100: 765

Hot dip galvanized. Incorporates features that make this anchor easy to install, strong and corrosion-resistant. Sharp cutting edge on the helix. Chisel point helps anchor work its way around rocks and other obstructions. 3/4" rod diameter. REA No. Z.TRIPLEYE ANCHORS. Helix Dia.: 6", Rod Lgth.: 5'6", Std. Pkg.: 1, Wt., Lbs. Per 100: 1050

GROUND WIRE STAPLES JOSLYN Cut (slash) point. Hot dip galvanized. Coppercoated. Dimensions: 1-1/2 x 38", Wire Dia.: .162, Ctn. Qty.: 50 Lbs. REA Accepted.

TRANSFORMER TRAINER BRACKET JOSLYN Bracket is clamped to bottom edge of transformer tank to provide an insulated support for the secondary leads. Bolt end is fitted with polyethylene cap. Each bracket complete with insulator. REA accepted. Mach. Bolt: 1/2" x 6", Insulator: Class 53-2, Ctn. Qty.: 10