Dutton-Lainson Company

NO-BOLT CROSSARM BRACE ALUMA-FORM FLAT APITONG BRACE Cross section 13/16" x 1 3/4". Hole size 7/16" at arm, 9/16" at pole. 6 lb. pressure Penta treated. No right or left required. Drop: 18", Span: 38", Ctn. Pr.: 10, Wt., Lbs. Pr.: 2.6

CLUSTER MOUNTS ALUMAFORM Aluminum alloy. Ground wire clamps are furnished. Sufficient hot dip galvanized transformer mounting bolts, nuts and lock washers furnished. Adjustable. Easy to install. Light, preassembled. Corrosion resistant. Simple and safe. Installation instruction sheet and pole measuring tape furnished. No.6M3-6: Mounts three 3KVA through 50 KVA transformers (latest standards), any combination of 12" EEI-NEMA type A lugs. No. adapter plates required. 6" mounting distance from pole 2000 lb. load tested per position. KVA's: 3-50, Ctn. Qty.: 1, Ctn. Wt.: 16 1/2

CLUSTER MOUNTS ALUMAFORM Aluminum alloy. Ground wire clamps are furnished. Sufficient hot dip galvanized transformer mounting bolts, nuts and lock washers furnished. Adjustable. Easy to install. Light, preassembled. Corrosion resistant. Simple and safe. Installation instruction sheet and pole measuring tape furnished. No.15M3-6: Mounts three 3 KVA through 100 KVA transformers, any combination of 12" or 24" EEI-NEMA type A and B lugs. If adapter plates are used 167 KVA and larger transformers can be mounted. 6" mounting distance from pole. 5000 lb. load tested per position. KVA's: 3-100, Ctn. Qty.: 1, Ctn. Wt.: 31

EQUIPMENT MOUNT ALUMA-FORM Heavy duty, 3-phase equipment mount designed to support arrestors of both intermediate and distribution types, disconnecting devices or potheads. Adjustable to provide 20 forward inclination or hook-stick switches or potheads. Six distribution arrestors can be mounted. Mounts on wood poles with two 5/8" thru-bolts and two lag screws (not furnished). Four device included. Ctn. Qty.: 1, Wt., Lbs.: 18

SINGLE PHASE BRACKET ALUMA-FORM A single position bracket for thru-bolt mounting on wood poles. For distribution cutouts, arrestors and potheads. 5/8" thru-bolt recommended for installation. 5" high back plate is drilled to receive 1/2" lag screw. Two brackets may be mounted back-to-back on same thru-bolt. #4 solid aluminum pigtail provided for ground connection. Pkg. Qty.: 1, Wt., Lbs.: 2.5

THREE PHASE TERMINATOR-ARRESTER MOUNTS ALUMAFORM Mounts with 5/8" thru-bolt and 1/2" lag screw (not included). Equipment mounting hardware and grounding device included. 26° angle standard. Ctn. Qty.: 1

Standoff Bracket Aluma-Form 6B-CSO-6 2-Way.

T-SLOT 4 WAY CHANNEL ONLY 12" ALU-4WT-12.

18 inch Aluma-Form 4 way tee mounting channel

T-SLOT 4 WAY CHANNEL ONLY 24" ALU-4WT-24.

1" Conduit Strap.

STK-1.5 Conduit Strut Strap Kit, 1-1/2 in Dia, Bolt-On Mount, For Use With CSO and Bolt-A-Band Systems, Aluminum.

The Aluma-form STK-2 Strap kits are available for use with the CSO system with variations. The straps have two holes and strap kit consists of straps, bolts, nuts, and washers for mounting one conduit section.

Aluma-Form STK-2.5 Rigid Strut Strap, 2-1/2", Aluminum.

The Aluma-form STK-3 Strap Kits are available for use with the CSO system with some variations. The straps have two holes and the strap kit consists of straps, bolts, nuts, and washers for mounting one conduit section. For Use With Rigid/IMC Conduit.