Dutton-Lainson Company

PV-MOLD POLE RISER CARLON Non-metallic, designed to protect power and communication cables installed vertically on poles. Flanged design features belled ends for easy installation. Produced from tough, high-impact material; requires no maintenance, not affected by weather or corrosive atmospheres. Meets or exceeds all requirements outlined in NEMA PH 41 specs. Conforms to requirements outlined in the NEC and NESC. Supplied in 10' lengths. Desc.: Sch. 40, Size: 4", Ctn. Qty.: 1

PV-MOLD POLE RISER CARLON BACKING PLATE For use with flanged design only. Size: 4", Ctn. Qty.: 1

Blackburn W40-1 W-1 Type W Service Entrance Wedge Clamp, 4/0 to 2/0 AWG ASCR/AAAC/Stranded Conductor, Aluminum, Bare

WSD-350I Pedestal Splicer Reducers Aluminum Mechanical.

Blackburn L250 Type L Compact Mechanical Connector, 6 AWG to 250 kcmil Stranded Copper Conductor, 13/32 in Stud, 1 Bolt Holes, Copper

Blackburn PAC345 2-Conductor Type PAC Parallel Groove Clamp With Cast Copper Liner, ACSR/Aluminum/Copper/Solid/Stranded Conductor, 8 to 1/0 AWG Main/Run, 8 to 1/0 AWG Tap, 3/8 in Bolt, Aluminum

Blackburn PAC7 2-Conductor Type PAC Parallel Groove Clamp With Cast Copper Liner, ACSR/Aluminum/Copper/Solid/Stranded Conductor, 1/0 AWG to 336.4 kcmil, 6 to 1/0 AWG Main/Run, 8 to 1/0 AWG Tap, 3/8 in Bolt, Aluminum

CMC LA-225 Aluminum Circuit Breaker Lug 6-250MCM AL9CU

Blackburn AJ-2 E-Z Ground Dual Rated Non-Insulated Water Pipe Grounding Clamp, 6 AWG to 250 kcmil Conductor, Aluminum

Blackburn AJ-2124 E-Z Ground Dual Rated Water Pipe Grounding Clamp, 6 AWG to 250 kcmil Conductor, Aluminum

MOLDED RUBBER SPLICES 3M One-piece inline splices made from specially formulated peroxide-cured, EPDM rubbers. Continuous current rating of each splice is equal to the current rating of the cable it is sized to. Meets requirements of IEEE404. FOR USE ON 15 KV RATED CN & JCN CABLE Insulation O.D. Range: 0.637-0.90", Conductor Size Cu or AL: 1/0 AWG Str., Ctn. Qty.: 1

MOLDED RUBBER SPLICES 3M One-piece inline splices made from specially formulated peroxide-cured, EPDM rubbers. Continuous current rating of each splice is equal to the current rating of the cable it is sized to. Meets requirements of IEEE404. FOR USE ON 15 KV RATED CN & JCN CABLE Insulation O.D. Range: 0.637-0.90", Conductor Size Cu or AL: 2 AWG Str.-1 AWG Sol., Ctn. Qty.: 1

MOLDED RUBBER SPLICES 3M One-piece inline splices made from specially formulated peroxide-cured, EPDM rubbers. Continuous current rating of each splice is equal to the current rating of the cable it is sized to. Meets requirements of IEEE404. FOR USE ON 15 KV COPPER OR ALUMINUM, CN OR JCN CABLE Insulation O.D. Range: 0.637-0.900", Conductor Size Cu or AL: 1/0 AWG Str., Ctn. Qty.: 1

MOLDED RUBBER SPLICES 3M One-piece inline splices made from specially formulated peroxide-cured, EPDM rubbers. Continuous current rating of each splice is equal to the current rating of the cable it is sized to. Meets requirements of IEEE404. FOR USE ON 15 KV COPPER OR ALUMINUM, CN OR JCN CABLE Insulation O.D. Range: 0.637-0.900", Conductor Size Cu or AL: 2 AWG Str. - 1-1/0 AWG Sol., Ctn. Qty.: 1

MOLDED RUBBER SPLICES 3M One-piece inline splices made from specially formulated peroxide-cured, EPDM rubbers. Continuous current rating of each splice is equal to the current rating of the cable it is sized to. Meets requirements of IEEE404. FOR USE ON 15 KV COPPER OR ALUMINUM, CN OR JCN CABLE Insulation O.D. Range: 0.807-1.055", Conductor Size Cu or AL: 4/0 AWG Str., Ctn. Qty.: 1

MOLDED RUBBER SPLICES 3M One-piece inline splices made from specially formulated peroxide-cured, EPDM rubbers. Continuous current rating of each splice is equal to the current rating of the cable it is sized to. Meets requirements of IEEE404. FOR USE ON 15 KV RATED CN & JCN CABLE Insulation O.D. Range: 0.840-1.05", Conductor Size Cu or AL: 4/0 AWG Str., Ctn. Qty.: 1