Dutton-Lainson Company

Dimensions: 20"Hx30"Wx8 1/4"D Wt., Lbs.: 55 Socket switch combinations burial mounting sleeves. Fabricated from 14 gauge galvanized steel. Oven cured powder polyester finish.

Main/Auxil. Rating: 400A Meter Form: 3S Single phase. 240V AC. Switches are double pole/double throw with center off position.

Dimensions: 20"Hx32"Wx11 1/4"D Wt., Lbs.: 62 Socket switch combinations burial mounting sleeves. Fabricated from 14 gauge galvanized steel. Oven cured powder polyester finish.

Square washers. Hot dip galvanized. In.: 4 x 4 x 1/4, Size, Hole In.: 13/16, Size, Bolt In.: 3/4, Std. Pkg.: 50

SLIM LINE(TM) CROSSARM BRACE ALUMA-FORM Economical, strong/high density 1 1/4" square apitong wood, patented 6061-T6 aluminum end fittings. Apitong-cross section 1 1/4" x 1 1/4" (6 lb. pressure Penta-treated). Hole size 9/16" at arm, 11/16" at pole. No-bolt fittings reduce static. Reversible. Lightweight. Dimensions: 60" Span, 18" Drop, Ctn. Qty.: 5

WING TYPE CLUSTER MOUNT ALUMAFORM Mounts three, 3-50 kVA units (1,000 lbs./phase @ 18" moment) with 12" EEI/NEMA lug spacing. Preassembled, bolted 6061-T6 aluminum alloy construction. One piece rigid frame. Mounts to pole on 13 1/2" hole centers using two 3/4" through-bolts (not supplied). Furnished with 5/8" transformer mounting hardware. Ctn. Qty.: 1, Wt., Lbs.: 22

NO-BOLT CROSSARM BRACE ALUMA-FORM FLAT APITONG BRACE Cross section 13/16" x 1 3/4". Hole size 7/16" at arm, 9/16" at pole. 6 lb. pressure Penta treated. No right or left required. Drop: 18", Span: 38", Ctn. Pr.: 10, Wt., Lbs. Pr.: 2.6

CLUSTER MOUNTS ALUMAFORM Aluminum alloy. Ground wire clamps are furnished. Sufficient hot dip galvanized transformer mounting bolts, nuts and lock washers furnished. Adjustable. Easy to install. Light, preassembled. Corrosion resistant. Simple and safe. Installation instruction sheet and pole measuring tape furnished. No.6M3-6: Mounts three 3KVA through 50 KVA transformers (latest standards), any combination of 12" EEI-NEMA type A lugs. No. adapter plates required. 6" mounting distance from pole 2000 lb. load tested per position. KVA's: 3-50, Ctn. Qty.: 1, Ctn. Wt.: 16 1/2

CLUSTER MOUNTS ALUMAFORM Aluminum alloy. Ground wire clamps are furnished. Sufficient hot dip galvanized transformer mounting bolts, nuts and lock washers furnished. Adjustable. Easy to install. Light, preassembled. Corrosion resistant. Simple and safe. Installation instruction sheet and pole measuring tape furnished. No.15M3-6: Mounts three 3 KVA through 100 KVA transformers, any combination of 12" or 24" EEI-NEMA type A and B lugs. If adapter plates are used 167 KVA and larger transformers can be mounted. 6" mounting distance from pole. 5000 lb. load tested per position. KVA's: 3-100, Ctn. Qty.: 1, Ctn. Wt.: 31

EQUIPMENT MOUNT ALUMA-FORM Heavy duty, 3-phase equipment mount designed to support arrestors of both intermediate and distribution types, disconnecting devices or potheads. Adjustable to provide 20 forward inclination or hook-stick switches or potheads. Six distribution arrestors can be mounted. Mounts on wood poles with two 5/8" thru-bolts and two lag screws (not furnished). Four device included. Ctn. Qty.: 1, Wt., Lbs.: 18

SINGLE PHASE BRACKET ALUMA-FORM A single position bracket for thru-bolt mounting on wood poles. For distribution cutouts, arrestors and potheads. 5/8" thru-bolt recommended for installation. 5" high back plate is drilled to receive 1/2" lag screw. Two brackets may be mounted back-to-back on same thru-bolt. #4 solid aluminum pigtail provided for ground connection. Pkg. Qty.: 1, Wt., Lbs.: 2.5

THREE PHASE TERMINATOR-ARRESTER MOUNTS ALUMAFORM Mounts with 5/8" thru-bolt and 1/2" lag screw (not included). Equipment mounting hardware and grounding device included. 26° angle standard. Ctn. Qty.: 1

Standoff Bracket Aluma-Form 6B-CSO-6 2-Way.

T-SLOT 4 WAY CHANNEL ONLY 12" ALU-4WT-12.

T-SLOT 4 WAY CHANNEL ONLY 24" ALU-4WT-24.

1" Conduit Strap.