Dutton-Lainson Company

WRAPLOCK TIE PREFORMED C-Neck, Revised Had Style for Wraplock NEMA Class 55-2 and 55-3 Color Code: Red 4/0-6/1, Ctn. Qty.: 50

WRAPLOCK TIE PREFORMED C-Neck, Revised Had Style for Wraplock NEMA Class 55-2 and 55-3 Color Code: Yellow T-2 1/0, Ctn. Qty.: 50

Helical Ties for T2 Conductor. 2 x 1/0 (6/1)ACSR, (7/W) AAAC.

EZ-WRAP SPOOL TIES PREFORMED For use on aluminum based conductors with diameters from .19 to .968". Description: #4 6/1-7/1, Ctn. Qty.: 100

EZ-WRAP SPOOL TIES PREFORMED For use on aluminum based conductors with diameters from .19 to .968". Description: #2 6/1-7/1, Ctn. Qty.: 100

EZ-WRAP SPOOL TIES PREFORMED For use on aluminum based conductors with diameters from .19 to .968". Description: #1/0 6/1, Ctn. Qty.: 100

Preformed Line Products EZSP-4380 EZ-WRAP SPOOL TIE .666-.755 NEW. Tie Assembly: -An EZ-WRAP Spool Tie Assembly consists of one metal tie component plus tie tube.

PLASTIC GUY MARKER PREFORMED LINE PRODUCTS Made of high density UV stabilized polyethylene which is differentially stressed for patented "bear hugging" action, when installed over a guy wire and dead end fitting. Excellent color retention and nonembrittling properties. Wraps around guy strand, fittings and anchor rod with 30-50% overlap. Wall thickness: 60 mils. Dia: 1.25". Accommodates guy strand ranges of 1/4" to 5/8". Color: Orange, Length (m): 8' (2.4), Pkg. Qty.: 30

Guy Guards: Guard Type - Guy Marker; Tube Profile - Full Round inBin; Material - Polyethylene; Finish - Yellow / Reflective Tape; Diameter - in - 1.50; Guard Length - ft - 8

PLASTIC GUY MARKER PREFORMED LINE PRODUCTS Quick installation; marker pops onto guy wire, opening perforated cut. UV stabilized. Excellent impact resistance. Recessed hardware to protect children and animals. One strap clamp at end. Color: Yellow, OD: 8' (2.4), Pkg. Qty.: 30

The CUSHION-GRIP T2 Support is intended for use on aluminum based twisted pair conductors.

Preformed Line Products YC-5207 Y-CLEVIS EYE .751-1.005

CUSHION-GRIP T2 Suspension is intended for use on Twisted Pair conductor. It is designed to protect the conductor from bending stress, compression stress, and abrasion.

PLASTIC GUY MARKER EMC Made of high density UV stabilized polyethylene, differentially stressed to cause wrapping when installed over a guy wire and dead end fitting. Excellent color retention and non-embrittling properties. V-groove clamp is attached with s.s. rivets and a washer. Clamp accommodates a guy strand range of 1/4" thru 5/8". Bolt has nylon cap to protect against guy strand damage. Conforms to NESC Article 282, para. E. REA Listed (at-2). Length: 8', I.D.: 2.75, Ctn. Qty.: 25

OVERHEAD CONVENTIONAL DISTRIBUTION TRANSFORMERS HOWARD INDUSTRIES Type S. Non-protected. Oil immersed 65 degrees rise. High voltage 7200/12470Y. Low Voltage 120/240. Single Phase. Class A with two fully insulated high voltage bushings. Single Bushing - Conventional - No Taps. HV: 12470GRDY/7200 - LV: 120/240. KVA: 1.5, Weight: 114

Square and round washers. Hot dip galvanized. In.: 2 x 2 x 1/8", Size, Hole In.: 9/16, Size, Bolt In.: 1/2, Std. Pkg.: 500