Dutton-Lainson Company

Hot dip galvanized. Incorporates features that make this anchor easy to install, strong and corrosion-resistant. Sharp cutting edge on the helix. Chisel point helps anchor work its way around rocks and other obstructions. 3/4" rod diameter. REA No. Z.TRIPLEYE ANCHORS. Helix Dia.: 6", Rod Lgth.: 5'6", Std. Pkg.: 1, Wt., Lbs. Per 100: 1050

GROUND WIRE STAPLES JOSLYN Cut (slash) point. Hot dip galvanized. Coppercoated. Dimensions: 1-1/2 x 38", Wire Dia.: .162, Ctn. Qty.: 50 Lbs. REA Accepted.

TRANSFORMER TRAINER BRACKET JOSLYN Bracket is clamped to bottom edge of transformer tank to provide an insulated support for the secondary leads. Bolt end is fitted with polyethylene cap. Each bracket complete with insulator. REA accepted. Mach. Bolt: 1/2" x 6", Insulator: Class 53-2, Ctn. Qty.: 10

TRANSFORMER TRAINER BRACKET JOSLYN Bracket is clamped to bottom edge of transformer tank to provide an insulated support for the secondary leads. Bolt end is fitted with polyethylene cap. Each bracket complete with insulator. REA accepted. Mach. Bolt: 1/2" x 4 1/2", Insulator: Class 53-1, Ctn. Qty.: 15

Square washers. Hot dip galvanized. In.: 3 x 3 x 1/4, Size, Hole In.: 13/16, Size, Bolt In.: 3/4, Std. Pkg.: 50

Square washers. Hot dip galvanized. In.: 4 x 4 x 1/4, Size, Hole In.: 15/16, Size, Bolt In.: 7/8, Std. Pkg.: 50

ANCHOR RODS MACLEAN POWER SYSTEMS Hot dip galvanized. For use with expanding anchors. THIMBLEYE Rods (R) Dia. In.: 5/8, Lgth. Ft.: 7, Lbs. Min.: 16,000, Std. Pkg.: 10, Wt., Lbs.: 750

ANCHOR RODS MACLEAN POWER SYSTEMS Hot dip galvanized. For use with expanding anchors. THIMBLEYE Rods(R) Dia. In.: 3/4, Lgth. Ft.: 8, Lbs. Min.: 23,000, Std. Pkg.: 5, Wt., Lbs.: 1,250

ANCHOR RODS MACLEAN POWER SYSTEMS Hot dip galvanized. For use with expanding anchors. TWINEYE Rods(R) Dia. In.: 5/8, Lgth. Ft.: 7, Lbs. Min.: 16,000, Std. Pkg.: 10, Wt., Lbs.: 750

ANCHOR RODS MACLEAN POWER SYSTEMS Hot dip galvanized. For use with expanding anchors. TWINEYE Rods(R) Dia. In.: 3/4, Lgth. Ft.: 8, Lbs. Min.: 23,000, Std. Pkg.: 5, Wt., Lbs.: 1,270

GROUND WIRE STAPLES JOSLYN Cut (slash) point. Square Shank, Barbed-Hot dip galvanized. Dimensions: 1-1/2 x 38", Wire Dia.: .131, Ctn. Qty.: 350 PCS. REA Accepted.

Square M-F Lock Nuts. Hot dip galvanized. Should always be used to complete a static-proof installation. Used with a regular nut to form a solid unit which cannot loosen. Turns on the bolt with a free fit. When it touches the nut, it takes 1/2 to 3/4 of a turn to flatten the concave surface bonding it to the thread. Bolt Size: 3/8, Width In.: 5/8, Thickness, In.: 1/4, Std. Pkg.: 3000, Wt., Lbs./100: 1.2

Square M-F Lock Nuts. Hot dip galvanized. Should always be used to complete a static-proof installation. Used with a regular nut to form a solid unit which cannot loosen. Turns on the bolt with a free fit. When it touches the nut, it takes 1/2 to 3/4 of a turn to flatten the concave surface bonding it to the thread. Bolt Size: 1/2, Width In.: 13/16, Thickness, In.: 19/64, Std. Pkg.: 1500, Wt., Lbs./100: 2.3

Square M-F Lock Nuts. Hot dip galvanized. Should always be used to complete a static-proof installation. Used with a regular nut to form a solid unit which cannot loosen. Turns on the bolt with a free fit.When it touches the nut, it takes 1/2 to 3/4 of a turn to flatten the concave surface bonding it to the thread. Bolt Size: 5/8, Width In.: 1, Thickness, In.: 3/8, Std. Pkg.: 800, Wt., Lbs./100: 4.3

Square M-F Lock Nuts. Hot dip galvanized. Should always be used to complete a static-proof installation. Used with a regular nut to form a solid unit which cannot loosen. Turns on the bolt with a free fit.When it touches the nut, it takes 1/2 to 3/4 of a turn to flatten the concave surface bonding it to the thread. Bolt Size: 3/4, Width In.: 1 1/8, Thickness, In.: 7/16, Std. Pkg.: 550, Wt., Lbs./100: 6.3

MACLEAN POWER SYSTEMS #J8604-1/2 Bolt, 3/8 in. Dia x 4.5 in. L, 3.00 in. L Thread, Square Head, Steel, Hot Dip Galvanized