Dutton-Lainson Company

4/0-1C 15KV EPR/PVC 220MIL UL

Blackburn SAPT-4-26 SAPT Compression Pin Terminal, 4/0 AWG Conductor, Die Code: TU, 52, BG, 243, 5/8, 2 in Dia x 6 in L Pin, Aluminum/Copper

Blackburn SAPT-2-26 SAPT Compression Pin Terminal, 2 to 1 AWG, 1/0 AWG Conductor, Die Code: TU, 52, BG, 243, 5/8, 2 in Dia x 6 in L Pin, Aluminum/Copper

Blackburn Compression Pin Terminal, Series: SAPT, 1/0 AWG Conductor, Die Code: TU, 52, BG, 243, 5/8, 2 in Pin Dia, 6 in Pin Length, Stranded/Solid, Aluminum/Copper

Blackburn Compression Pin Terminal, Series: SAPT, 4/0 AWG Conductor, Die Code: TX/76/249/840/11A, 0.325 in Pin Dia, 6 in Pin Length, TiN Coated, Aluminum/Copper

Blackburn HLC2108 Protected Thread Hot Line Clamp, 8 to 2/0 AWG Solid/Stranded Conductor, Bronze

Blackburn HLC2108AP9 HLC Protected Thread Hot Line Clamp, 6 to 2/0 AWG, 8 to 2/0 AWG ACSR Conductor, Aluminum

Blackburn HLC3974AP Protected Thread Hot Line Clamp, 6 AWG to 397.5 kcmil, 400 kcmil Main, 6 to 3/0 AWG, 6 to 4/0 AWG Tap ASCR/Solid Conductor, Aluminum

Blackburn HLC2108P HLC Protected Thread Hot Line Clamp, 6 to 2/0 AWG, 8 to 2/0 AWG ACSR Conductor, Bronze

CUTOUT MACLEAN POWER SYSTEMS 15 KV Open type cutout, type L interchangeable fuse tube, silicone insulator w/parallel groove connector & crossarm bracket. Amperage: 100, Wt. Lbs.: 11.2

CUTOUT MACLEAN POWER SYSTEMS 15 KV Open type cutout, type L interchangeable fuse tube, silicone insulator w/parallel groove connector & crossarm bracket. Amperage: 200, Wt. Lbs.: 15.3

COMBINATION CUTOUT/ ARRESTER MACLEAN POWER SYSTEMS Cornbina1ion cutout arrester. 15KV 100 amp polymer cutout w/8.4KV MCOV H.D. polymer housed arrester. Interchangeable fuse tube. Parallel groove connector and NEMA X-ARM mounting bracket. Ctn. Qty.: 1, KV: 15, Wt., Lbs.: 16

COMBINATION CUTOUT/ ARRESTER MACLEAN POWER SYSTEMS Combination cutout arrester. 15KV 100 amp polymer cutout w/8.4KV MCOV H.D. polymer housed arrester. Interchangeable fuse tube. Parallel groove connector and NEMA X-ARM mounting bracket. KV: 27

Distribution Deadend. Silicone rubber formulation. Pultruded fiberglass core rod. Corrosion resistant glass fibers in an epoxy resin matrix. Insulator assembly is completed with the addition of galv. ductile iron end-fittings, crimped to the fiberglass core. The sealing system is a version of the P-S-T seal utilized on EHV Transmission Class insulators. Length: 300mm. Leakage distance: 401mm. Arcing distance: 192mm. Low freq. flashover (kV): 90-dry, 65-wet. Critical impulse flashover (kV): 140-pos, 145-neg. Voltage: 16kV, Ctn. Qty.: 18

Bolt on Hub 1"

Bolt on Hub 1-1/4"