Dutton-Lainson Company

The CUSHION-GRIP T2 Support is intended for use on aluminum based twisted pair conductors.

Preformed Line Products YC-5207 Y-CLEVIS EYE .751-1.005

CUSHION-GRIP T2 Suspension is intended for use on Twisted Pair conductor. It is designed to protect the conductor from bending stress, compression stress, and abrasion.

PLASTIC GUY MARKER EMC Made of high density UV stabilized polyethylene, differentially stressed to cause wrapping when installed over a guy wire and dead end fitting. Excellent color retention and non-embrittling properties. V-groove clamp is attached with s.s. rivets and a washer. Clamp accommodates a guy strand range of 1/4" thru 5/8". Bolt has nylon cap to protect against guy strand damage. Conforms to NESC Article 282, para. E. REA Listed (at-2). Length: 8', I.D.: 2.75, Ctn. Qty.: 25

Square and round washers. Hot dip galvanized. In.: 2 x 2 x 1/8", Size, Hole In.: 9/16, Size, Bolt In.: 1/2, Std. Pkg.: 500

GUY HOOK Malleable iron guy hook, hot dip galvanized. 3/4" maximum bolt diameter; lower hole, 9/16" diameter for lag screw. Maximum strand diameter, 7/16". Thimble diameter, 1 3/8". REA accepted. Max. Str. Dia.: 7/16", Ctn. Qty.: 50, Wt., Lbs.: 1.29

UNIVERSAL GUYING ATTACHMENT MACLEAN POWER SYSTEMS For use on round or flat surfaces. These guying attachments are for use on insu­lated or uninsulated guy wires. For use with standard fiberglass insulators. Pkg.Qty.: 25, Approx. Wt.: 2

THIMBLE CLEVISES MACLEAN Iron Clevis-thimble. Strength lbs.: 35,000 thimble; 25,000 eye. Pkg.Qty.: 25

SQUARE-CURVED WASHER MACLEAN Square-curved washer, 3" x 3" x 5/8" max. bolt diameter. 5/16" thick at base, 1 3/8" diameter of base. REA accepted. Desc.: 3" x 3" x 5/8", Ctn. Qty.: 50, Wt., Lbs.: .53

CATTLE GUY GUARDS CARLSON INDUSTRIES Guys are applied to guy strand to prevent damage to guys by livestock. Pkg. Qty.: 5

CATTLE GUY GUARDS CARLSON INDUSTRIES Guys are applied to guy strand to prevent damage to guys by livestock. Pkg. Qty.: 5

Maclean Power #SI-750 Socket Eye. 25000 lbs Ultimate Strength, ANSI 52-3 & 5,

TRUNNION CLAMP MACLEAN Aluminum body and keeper for trunnion type post insulators. Range: 0.35-0.84 #1-477 ACSR

DEAD END CLAMPS MACLEAN Quadrant type straight wire groove. Keeper design - shape makes clamp more efficient and easier to install.More grip on conductor, less damage to strands. Greater slip strength built-in for higher holding power. Easily installed; easier to work with a hot stick. Protected contact area-covered design helps keep corrosive dirt and dust out of contact area. Compact, streamlined, lightweight,-strong and durable. Body and keeper cast of high strength aluminum alloy. All hardware is hot dipped galvanized steel. Breaking Strength: 8,000 Lbs., Ctn. Qty.: 25

DEAD-END CLAMP MACLEAN Aluminum hot line dead-end side opening clamp. Stainless steel cotter pin and compression spring. Conductor Size- Min.: #6 (6/1), Max.: 2/0 (6/1), Ctn. Qty: 20

DEAD-END CLAMP MACLEAN Aluminum hot line dead-end side opening clamp. Stainless steel cotter pin and compression spring. Conductor Size- Min.: 4, Max.: 4/0, Ctn. Qty: 25