Dutton-Lainson Company

GROUND WIRE STAPLES JOSLYN Cut (slash) point. Hot dip galvanized. Coppercoated. Dimensions: 1-1/2 x 38", Wire Dia.: .162, Ctn. Qty.: 50 Lbs. REA Accepted.

Square washers. Hot dip galvanized. In.: 3 x 3 x 1/4, Size, Hole In.: 13/16, Size, Bolt In.: 3/4, Std. Pkg.: 50

Square washers. Hot dip galvanized. In.: 4 x 4 x 1/4, Size, Hole In.: 15/16, Size, Bolt In.: 7/8, Std. Pkg.: 50

GROUND WIRE STAPLES JOSLYN Cut (slash) point. Square Shank, Barbed-Hot dip galvanized. Dimensions: 1-1/2 x 38", Wire Dia.: .131, Ctn. Qty.: 350 PCS. REA Accepted.

Square M-F Lock Nuts. Hot dip galvanized. Should always be used to complete a static-proof installation. Used with a regular nut to form a solid unit which cannot loosen. Turns on the bolt with a free fit. When it touches the nut, it takes 1/2 to 3/4 of a turn to flatten the concave surface bonding it to the thread. Bolt Size: 3/8, Width In.: 5/8, Thickness, In.: 1/4, Std. Pkg.: 3000, Wt., Lbs./100: 1.2

Square M-F Lock Nuts. Hot dip galvanized. Should always be used to complete a static-proof installation. Used with a regular nut to form a solid unit which cannot loosen. Turns on the bolt with a free fit. When it touches the nut, it takes 1/2 to 3/4 of a turn to flatten the concave surface bonding it to the thread. Bolt Size: 1/2, Width In.: 13/16, Thickness, In.: 19/64, Std. Pkg.: 1500, Wt., Lbs./100: 2.3

Square M-F Lock Nuts. Hot dip galvanized. Should always be used to complete a static-proof installation. Used with a regular nut to form a solid unit which cannot loosen. Turns on the bolt with a free fit.When it touches the nut, it takes 1/2 to 3/4 of a turn to flatten the concave surface bonding it to the thread. Bolt Size: 5/8, Width In.: 1, Thickness, In.: 3/8, Std. Pkg.: 800, Wt., Lbs./100: 4.3

Square M-F Lock Nuts. Hot dip galvanized. Should always be used to complete a static-proof installation. Used with a regular nut to form a solid unit which cannot loosen. Turns on the bolt with a free fit.When it touches the nut, it takes 1/2 to 3/4 of a turn to flatten the concave surface bonding it to the thread. Bolt Size: 3/4, Width In.: 1 1/8, Thickness, In.: 7/16, Std. Pkg.: 550, Wt., Lbs./100: 6.3

Hot dip galvanized Lag Screw, Gimlet Point. Rolled threads. Below the head is an upset shoulder with the same outside diameter as the threads to provide a snug fit in hardware mounting holes. 1/4 x 2", Min. Thread Lgth.: 1/2", Pkg. Qty: 2000

Maclean Power Systems J8743 Lag - Fetter Drive Regular Point - Size 3/8" X 3"

Hot dip galvanized. Rolled threads. Below the head is an upset shoulder with the same outside diameter as the threads to provide a snug fit in hardware mounting holes. Fetter Drive - Regular Point, Size: 1/2 x 4", Min. Thread Lgth: 2-5/8", Pkg. Qty: 250

Hot dip galvanized. Rolled threads. Below the head is an upset shoulder with the same outside diameter as the threads to provide a snug fit in hardware mounting holes. Fetter Drive - Drive Point, Size: 1/2 x 4", Min. Thread Lgth.: 2-5/8", Pkg. Qty.: 250

Hot dip galvanized. Rolled threads. Below the head is an upset shoulder with the same outside diameter as the threads to provide a snug fit in hardware mounting holes. Twist Drive - Drive Point, Size: 1/2 x 4", Min. Thread Lgth.: 2-5/8", Pkg. Qty.: 250

SEL-2431 Voltage Regulator Control

SEL 9253004 SEL-2431 Retrofit Replacement Kit - Cooper/McGraw-Edison - 18/10-position fanning strip (traditional interface)

SEL 9253005 SEL-2431 Retrofit Replacement Kit - Cooper - 20-position connector (dead-front interface)